Closed System Transfer Set Sterile 43cm

The Closed System Transfer Set is a needle free device with multi-lumen extensions designed for efficient fluid transfer. It consists of 2×2 lumen female luer lock connectors, attached to a 3-Way Stopcock. It also features three perforators with click clamps and a NeutralSite.

Key Features:

• 2 Dedicated set for efficient fluid transfer.
• 2 x 2 Lumen female luer lock connectors.
• 3-Way Stopcock.
• 3 Vented perforators.
• 1 NeutralSite.
• Long length with multiple points.
• Peel open pouch.

Product Data:

• Tubing diameter: 3mm
• Tubing length: 43cm
• Priming volume: 5mL
• Temperature range: 4 – 60°C
• Sterile EO
• The product is MRI and CT suitable.
• NeutralSite: Neutral displacement swabable needleless access site.
• Not Made with Natural Rubber Latex.
• Not Made with DEHP.
• Material: PVC, PC, ABS, PE
• NeutralSite Materials: PP, ABS and Silicone
• Shelf Life: 3 Years
• ARTG Number: 354371

For use by a qualified clinician. The below is only a suggestion and facility protocol must be followed for all clinical procedures where this product is used.

Caution:

• The integrity of the NeutralSite should be confirmed by the clinician before and immediately after each use.
• Glass syringes are NOT compatible with the NeutralSite.
• Single use only.
• DO NOT re-sterilise.
• DO NOT store at extreme temperatures and humidity, avoid direct sunlight. Handle with care.
• STERILE (EO), DO NOT use if the package or product has been damaged or contaminated.
• EU Notice: any serious incident that has occurred in relation to the device should be reported to the manufacturer and the competent authority of the Member State in which the user and /or patient is established.

Precautions:

• Do not use a needle or blunt cannula with the NeutralSite.
• The security of all connections should be checked once the circuit is established and monitored during use to prevent disconnection.
• Priming slowly can assist in reducing turbulence that can form air bubbles.
• If applicable, when inverting the NeutralSite during priming, gentle tapping whilst the fluid is passing the Y-site to the NeutralSite can assist with removing any trapped air.
• The risk of contamination can be reduced when using mechanical friction. The surface of the NeutralSite must be cleaned before and after each access, using an approved disinfectant. This step will ensure that any residual medication/blood remnants are immediately and effectively removed from the surface of the NeutralSite after use.

*This product image is only for reference.